Heras Fence Covers
Printed covers sized to standard Heras panels, in wind-permeable mesh. Turns site fencing into hoarding without the wind load that tears solid banners off temporary fence feet.
Specification
- Material
- 370gsm wind-permeable mesh
- Standard size
- 3.4m × 1.7m to fit Heras panels
- Finishing
- Reinforced hems, eyelets every 500mm
- Fixing
- Cable ties or bungees
- Outdoor life
- 3+ years
Best for
- Construction site perimeters
- Event and festival fencing
- Development marketing hoarding
- Screening compounds and yards
Why mesh, not PVC
Heras panels stand in free feet — they aren't fixed to the ground. A solid banner turns each panel into a sail and the whole run goes over in the first serious gust. Mesh lets wind through and the fence stays upright.
Standard sizing
3.4m × 1.7m covers a standard Heras panel with enough overlap to fix cleanly. Non-standard fencing is no problem — measure the frame and we'll cut to it.
Runs of panels
For a continuous run, artwork can span multiple covers so the design reads across the whole fence line. Tell us the panel count and we'll split the file.
Common questions
What size are Heras fence covers?+
3.4m × 1.7m as standard, which fits a standard Heras panel. We cut to any size if your fencing differs.
How do they fix to the fence?+
Cable ties or bungees through the eyelets, every 500mm. Tension evenly rather than pulling one corner tight.
Can artwork run across several panels?+
Yes. Give us the number of panels and we'll split a single design across them so it lines up on site.